Homepage  Products  MGI History
Contact Us  Online Store/Order  Links/Articles


MGI Self Adjusting Rate & Recoil Reducing Buffer

Movie #1 Click here if you use Internet Explorer. If you use Firefox, download the clip (Save to Disc) and then click on it.

This movie clip shows a 20-round burst with an 11.5" M16 using a factory buffer followed by another 20-round burst with the same M16 using an MGI buffer.

M16/M4/AR15 Rate Reducing Buffer
buffer.jpg (11480 bytes)
M16/M4/AR-15 Self Adjusting, Rate Reducing Buffer $165.00 + s&h

Movie #2 Click here if you use Internet Explorer. If you use Firefox, download the clip (Save to Disc) and then click on it.

This movie clip shows a 20-round burst with a 20" M16 using a factory buffer followed by another 20-round burst with the same M16 using an MGI buffer.


Just to illustrate the effectiveness of the new buffer, we shot a few videos during the testing. It was not until we arrived back in the shop that we realized just how much the muzzle rise was decreased. It is very obvious when you are shooting, but it is nothing short of AMAZING to see. Above are two videos we put together from this last time out. Each video shows a 20-round burst with the factory buffer, followed by a 20-round burst using the new MGI buffer. If you put your mouse pointer on the muzzle of the firearm, you will notice an amazing lack of rise, even under these complete magazine dumps!
Finally, a simple, drop-in unit that will reduce the rate of fire in your M16, M4, or AR15 without loosing reliability. This new mechanical (not hydraulic, like others) unit will automatically adjust to your individual weapon decreasing the rate of fire while increasing the accuracy potential. There are no special or weakened springs used with our   system to interfere with feed reliability. Testing has shown rate of fire reduction of over 300 rounds per minute.   Muzzle climb is drastically reduced meaning more rounds on your target.  The faster your cyclic rate is, the more reduction you will see.  During our testing, an 11.5" M16 with a cyclic rate of nearly 1100 rounds per minute    was tamed by our buffer to function at 754 rounds per minute.  We also tested the unit in an M16 with a 20" barrel that was cycling at 771 rounds per minute.  It dropped to 585 rounds per minute with this new rate reducer and almost completely eliminated muzzle rise, even under full automatic fire!
Our new rate reducing buffer will function in both full length rifles and carbines.  It has been tested with three calibers including 5.56mm, 9mm and 7.62x39, and functions well with all.
Related Items:
Rifle Adapters for Buffers: Full Length 5.56, .308, and .50 Beowulf


Home  |  Products  |  MGI History  |  Contact Us
Online Store / Orders  | 
Links

 

Copyright MG Industries, Inc.
All Rights Reserved